|
|
Garage with Fuel Station
Borkesz, Michael ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
Bachelor thesis presents the structural design of a load bearing steel structure of garage with roof construction of adjoining fuel station. The object is located in periphery area of Uherske Hradiste city, near Jarosov district. The ground plan dimensions are: 36 x 32 meters garage hall; 20 x 20 meters fuel station roofing. Heights of both construction tops are same – 10 meters above the surface. As the main material supporting elements was designed steel S355. The main supporting structure compose of trusses, which are hinged supported by columns. The roof deck is heat insulated, supported by purlins. The wall deck is simillar to roof deck, except of the front wall, which is partly composed of glass casing. At the both sides of garage hall are designed gates for vehicles. The roof deck of fuel station roof construction composes from one single trapezoidal sheet, also supported by purlins. The work contains structural design of individual elements, including mutual joints and anchoring. Calculations are performed according to standards of EN.
|
|
|
Mazda showroom and service
Došek, Samuel ; Kalánek, Ing Jiří (referee) ; Brzoň, Roman (advisor)
This diploma thesis describes the design of showroom and car service of Mazda brand in Trencin. It is a detached building on a flat terrain. The car showroom and car service have two above-ground floors and one underground floor. On the first underground floor there is an underground garage designed for new cars for sale. On the first floor there is a car showroom with a customer base and a car service with facilities for car service staff. On the second floor there are offices with facilities for staff. The building is designed from a reinforced concrete structure and porous concrete blocks. The ceilings are monolithic reinforced concrete and the roof is designed as flat with trusses and reinforced concrete slab. The work includes project documentation for the construction.
|
|
|
Car centre VW Group Brno
Thunová, Nicola Vanesa ; Suchánek,, Petr (referee) ; Nový, Alois (advisor) ; Bečkovská, Tereza (advisor)
ABSTRACT The subject of the bachelor’s thesis is an architectural study created within the AG033 subject. This study is the elaboration of the documentation for building permission and documentation for construction. The subject of this thesis is the design of a new building for the Volkswagen Group car center, which is to serve for sales, warranty and post-warranty repairs and servicing of ŠKODY, SEAT, VW and AUDI cars. This building is situated in Mikulov town, cadastral area Mikulov, in the industrial zone of the town. The specified set of plots is located near agricultural and industrial buildings at the end of Jiráskova street on flat terrain, there was no need to preserve the character of the existing sorrounding buildings. The building has a maximum of two floors in the part of the showroom, in the rest part of the building there is only one floor. The whole building is divided into thee basic parts: Showroom, warehouse, service. The remaining areas of the land are divided into the forecourt of a representative showroom, of communication and parking for customers, employees and parking lots. These areas are complemented by grassy areas with low greenery. The whole building is designed as several cubes stacked together. An exclusively flat roof at different height levels is designed here. The main entrance is located in the showroom facing south with the representative forecourt adjacent to Jiráskova street. The showroom has large wooden-aluminium windows and serves as a showcase for the car center. The structure is made of reinforced conncrete frame loadbearing structure filled with large windows and aerated concrete bloctks YTONG, the entire building is panelling by sandwich thermal insulation panel systém from Kingspan. The roof plane is solved using sandwich roof insulation panels also from the same company.
|
|
|
Evaluation of the Financial Situation in the Firm and Proposals to its Improvement
Dundáčková, Monika ; Štěnička, Miroslav (referee) ; Žižlavský, Ondřej (advisor)
This thesis is aimed on evaluation of the financial situation of a concrete company. In the first part, there is a profile of the company, and a basic performance analysis of internal and external factors which influence the company. The second part of thesis is an explanation of financial analysis, the principles of which are applied. In the third part, data gathered about the company is analysed and compared with a competitor. The final part of the work describes proposals to improve the financial situation of the analysed company.
|
|
| |
|
|
The Project Proposal for the Construction of a Car Service Complex
Dobeš, Jiří ; Smolíková, Lenka (referee) ; Doskočil, Radek (advisor)
The bachelor thesis deals with the project proposal for the construction of a car service complex. The first part is consisted of definitions of theoretical analysis, which will be used in practical part of bachelor thesis. The second part is going to be used to introduce the company and analyze the current situation of the company. The last part contains the processed whole project preparation, which is ready for realization.
|
|
|
Ventilation and warm air heating of service station
Bašta, Milan ; Pavelek, Milan (referee) ; Janotková, Eva (advisor)
This diploma thesis is focused on the design project of ventilation and warm air heating of a service station. The thesis starts with the introduction into this issue and the layout of the service station is presented here. Afterwards, calculations of the heat penetration coefficient, heat losses and heat load, as well as the amount of fresh air are presented here. Furthermore, the amount of supply air is assigned in this part. Consequently, a design project of ventilation and air heating is set up based on these calculations. The design project also includes the choice, dimensioning of local exhausting, a slot diffuser and of air duct paths. Moreover, pressure losses are calculated and the choice of an ventilation and heating unit is made. A design documentation with material specifications is also part of this diploma thesis.
|
|
|
Company Marketing Strategy
Honsová, Radka ; Sommer, Miroslav (referee) ; Schüller, David (advisor)
The diploma thesis deals with marketing strategy of the company. This company is a brand shop and service for Mercedes-Benz cars. The company has not clearly defined objectives and marketing strategy. The main goal of this thesis is to design objectives and strategy, based on marketing research and analysis.
|
|
|
AUTOCENTRUM VW GROUP MIKULOV
Šešulková, Jana ; Hudeček, Vladimír (referee) ; Dýr, Petr (advisor) ; Kacálek, Petr (advisor)
The aim of this bachelor's thesis was to design a new car center of the Volswagen group. The project is based on an architectural study, which was prepared within the subject AG033 – Architecture design studio on the topic of Autocentrum VW Group Mikulov in the 2nd year of bachelor's study. The plot is located in the cadastral territory of Mikulov in Moravia, Břeclav district, It is located in the industrial part of the city, the surrounding buildings are made up of industrial buildings, especially storages and productions. There is also a scrap metal purchase and warehouse. The plot is currently registered as an area intended for construction by production. The plot is located on flat terrain. The proposed object responds to the required functions. It is oriented perpendicular to Jiráskova Street, the main entrances are oriented to the main street towards the built-up part of the city. The building is located longitudinally on the plot and corresponds to its shape. It consists of three objects that are interconnected. Individual objects have their own function. The first building is adapted and designed mainly for sales and car show purposes. This is the most dominant building. It is followed by a significantly smaller and partially hidden storage area, which also includes facilities for employees and hygiene loops. In the last, rear part is the service. This is the second dominant part, highlighted by an illuminated expanded metal facade. The main material on the building is concrete, which is in line with the industrial character of the building and its surroundings. The façade is made of Cetris cement-fiber boards, which resemble the structure of white concrete. In the service building, the facade is solved with an openwork facade made of expanded metal, under which there is a smooth lime-cement plaster of white color. Concrete structures are also copied into the interior, especially by the recognized load-bearing elements in the individual parts.
|
|
|
The Project Proposal for the Construction of a Car Service Complex
Dobeš, Jiří ; Smolíková, Lenka (referee) ; Doskočil, Radek (advisor)
The bachelor thesis deals with the project proposal for the construction of a car service complex. The first part is consisted of definitions of theoretical analysis, which will be used in practical part of bachelor thesis. The second part is going to be used to introduce the company and analyze the current situation of the company. The last part contains the processed whole project preparation, which is ready for realization.
|
guest ::
